EasyManua.ls Logo

Vertiv Liebert APM2 - Communication Protocols; SNMP, Modbus, and Dry Contact Communication

Vertiv Liebert APM2
188 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10 Communication
This chapter provides information about the compatible communication protocols.
Vertiv™ Liebert® APM2 Supports:
SNMP Protocol communication
Modbus protocol communication
Dry contact communication
Velocity protocol communication
10.1 SNMP Protocol Communication
Vertiv's UNITY or SIC network management cards make the UPS an IOT device. These cards support SNMP protocol that
helps to monitor the UPS through network.
IRM series sensor can also be connected to these cards to provide environmental monitoring function. When the intelligent
equipment generates an alarm, the UNITY card and SIC card can notify the user by recording the log, sending trap
information, and trigger e-mails.
The UNITY card and SIC card provide three approaches for you to monitor your intelligent equipment and equipment room
environment:
Using web browser. Through the Web server function provided by the SIC card or UNITY card.
Using Network Management System (NMS) through the SNMP function provided by the SIC card or UNITY card.
Using SiteMonitor, network management software for equipment room power and environment through the
TCP/IP interface provided by the SIC card.
The SIC card can also work with the Network Shutdown computer safe shutdown program developed by Vertiv to provide
automatic safe shutdown function for your computer installed with Network Shutdown, so as to prevent data loss.
The communication card must be installed at the Intellislot port. See Figure 4.5 on page42.
For the installation and setting information of the SIC card, refer to the Site Interface Web/SNMP Agent Card User Manual in
accessory.
10.2 Modbus Protocol Communication
The Modbus (RTU) protocol communication is supported by the SIC card and UNITY card.
10.3 Dry Contact Communication
The UPS provides the following two dry contact communications:
IS-Relay card (Optional)
Dry contact port of central control module
10 Communication Proprietary and Confidential ©2023 Vertiv Group Corp. 165
Vertiv™ Liebert® APM2 30 to 120 kVA Modular UPS User Manual

Table of Contents

Other manuals for Vertiv Liebert APM2

Related product manuals