Vertiv™ NetSure™ Control Unit (NCU) User Manual
The NCU sends the Service-Type attribute. The Service-Type attributes supported are:
1 Login – browser privilege level.
5 Outbound – operator privilege level.
6 Administrative – admin privilege level.
7 NAS Prompt – engineer privilege level.
If the server responds with an unknown Service-Type, the NCU will record the event it in the system log and act as though access was
rejected, per RFC 2865.
The NCU does not support the Access-Challenge response from the server. If this response is received, it is ignored.
The radius server settings are programmed using the web interface. Admin privilege level access is required.
To Next Page
Loading...
