Vertiv™ NetSure™ Control Unit (NCU) User Manual
3 Local Display Menus
3.1 Overview
This section provides descriptions of the Local Display Menus. Refer also to “Passwords and Privilege Levels” on page 20 and
“Description of Local Display Menus Programmable Parameters” on page 101. For Web Interface, refer to “Web Interface Screens” on
page 110.
3.2 Menus
Figure 3.2 to Figure 3.10 provide flow diagrams of the menus accessed via the NCU Controller local display and keypad.
NOTE!
These instructions describe the complete functionality of the NCU Controller. Some functionality is dependent on
hardware connected to the NCU Controller. Some menu items shown may not be present in the NCU Controller used in your
system.
3.2.1 Factory Default Setpoints
Refer to the Configuration Drawing (C-drawing) furnished with your system for a list of factory default values.
3.2.2 Adjustment Range Restrictions
See Figure 3.1.
To Next Page
Loading...