VIPA CPU 21 Series User Manual

Chapter 7 Deployment of the CPU 21xDP Manual VIPA CPU 21x
7-8 HB103E - Rev. 05/45
The following picture illustrates the project engineering at the master and
the slave:
Slave: (VIPA_CPU21x of VIPA_21x.gsd)
PB-
Adr.:1
PB-
Adr.:2
DP200V CPU21x
Master: (VIPA_CPU21xDP of VIPA04d5.gsd)
315-2DP (2AF03-0AB0)
315-2DP (2AF03-0AB0)
PB-
Adr.:5
OUT
IN
centralized periphery
.
.
.
centralized periphery
CPU 21x-2BP02
Module
Input m(Bytes)
Output (Bytes)
Module
The CPU 21xDP is configured in the SIMATIC manager from Siemens.
Following requirements for System 200V resp. System 300 have to be
fulfilled before configuration:
• SIMATIC manager from Siemens is installed.
• GSD-file has been integrated in the hardware configurator of Siemens.
• There is a possibility for data transfer between PG and CPU.
The hardware configurator is part of the SIMATIC manager from Siemens
for project engineering. The modules parameterizable via this tool are in
the hardware catalog of this tool.
For the deployment of the Profibus-DP slaves from VIPA you have to
include the modules via an GSD-file from VIPA in the hardware catalog.
The installation of a GSD-file requires the unzipped version as .gsd.
• Start the hardware configurator from Siemens. For including a new
GSD-file, no project may be opened.
• Open the GSD-file window under Options > Install new GSD-file.
• Insert the delivered data device and select the wanted GSD-file. Via
[Open] you install the GSD-file.
Now you'll find the VIPA modules included in the hardware catalog under
Profibus-DP > Additional Field devices > I/O > VIPA.
Reference
between master
and slave
Project
engineering of
the CPU 21xDP
Preconditions
Install hardware
configurator from
Siemens
Include GSD-file

VIPA CPU 21 Series Specifications

General

Brand	VIPA
Model	CPU 21 Series
Category	Control Unit
Language	English