VIPA CPU 21 Series - Hardware configuration CPU 21 xCAN and System 200 V modules

Manual VIPA CPU 21x Chapter 8 Deployment CPU 21xCAN
HB103E - Rev. 05/45 8-11
The hardware configuration of the System 200V has the following
approach:
• Start the hardware configurator from Siemens with a new project and
add a profile rail from the hardware catalog.
• Add the CPU 315-2DP (6ES7 315-2AF03-0AB0 V1.2). Create a new
Profibus subnet for that.
• Add the System "VIPA_CPU21x" to the subnet. This is to find in the
hardware catalog under PROFIBUS DP > Additional field devices > IO >
VIPA_System_200V. Assign the Profibus address 1 to this module.
• Place the CPU 21xCAN at the 1
st
slot from the hardware catalog in your
configurator.
• Include your System 200V modules in the plugged sequence.
• If needed, parameterize the CPU res. the modules. The parameter
window opens with a double click on the according module.
• Save your project.
Hardware strukture
Module
CPU 315-2DP
DP
MPI/DP
System 300
Slot
1
2
X2
X1
3
4
5
6
7
8
9
10
11
1
System 200V
DI DO DIO AI AO FMCPU 21xCAN
Project
engineering
vipa_21x
System 200V
DP master system
Profibus-Adr.: 1
2
3
Module
CPU 21xCAN
DI
DO
DIO
AI
AO
FM
Hardware configura-
tion CPU 21xCAN and
System 200V
modules