41
User Settings
Configure user management as well as user and group permissions.
Management
You can add a user account(s) that can be edited at a later time.
1.
From <SYSTEM SETUP> - <USER>, select
<MANAGEMENT>.
2.
Use the [▲▼◀ ▶/ENTER] buttons on the remote control
or use the mouse to add a user account or select an
item that you want to edit.
3.
To apply the change, click <APPLY> in the bottom of
the screen.
4.
When done, press the [EXIT] button on the remote
control or click <CLOSE> in the lower screen. The
confirmation message appears and you will return to
the previous menu.
To add a user account
1.
Click <ADD> in the bottom of the screen.
2.
Use the [▲▼◀ ▶] buttons on the remote control and
move to a desired item. Then, press [ENTER] to select
the item.
USER ID : enter the user ID using the virtual keyboard.
PASSWORD : With the virtual keyboard, enter the
password.
GROUP : select a group that the user belongs to.
EMAIL : Type in the e-mail address to which you will
receive email notifications.
EMAIL NOTIFY : Choose whether you will receive
email notifications.
To use <EMAIL NOTIFY>, an email server must be configured previously in <NETWORK>, <EMAIL>.
COVERT CHANNEL : You can set specific channels to be covert for specific users.
<COVERT CHANNEL> this option hides the video of the selected channel from being displayed on the screen.
3.
When done, click <OK>.
The added user account will be listed.
To Next Page
Loading...