2-268 School Zone
Features and Operation
STARPLUS STSe - Programming & Operations Manual August 2005
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 is lit. The display updates to reflect current programming for Page A:
4. Press button #20. The display updates to reflect current programming for Page B.
5. Press the SCHOOL ZONE flexible button (Button #7). The following message displays:
6. Dial a valid number (0-2) to assign a station as an Administrator, Classroom, or as neither.
0 = Disabled (neither Administrator or Classroom)
1 = Administrator
2 = Classroom
7. Press [HOLD]. A confirmation tone sounds.
DEFAULT … All stations are disabled (not assigned as an Administrator or a Classroom).
CONTROL SCHOOL ZONE CALL FORWARDING
1. Press FLASH and dial [09].
2. Press the SCHOOL MODE flexible button (Button #10). The following message displays:
3. Dial a valid call forwarding condition code (0 or 6-9).
0 = Disabled 8 = Busy Call Forward
6 = All Call Forward 9 = Busy / No Answer Call Fwd
7 = No Answer Call Forward
4. Press [HOLD]. A confirmation tone sounds.
Flash 50 - Fixed Numbers Flash 51 - Flexible Numbers
XXX - XXX PAGE A
ENTER BUTTON NUMBER
SXXX PAGE A
ENTER BUTTON NUMBER
XXX-XXX = fixed station range XXX = 3- or 4-digit flexible number
Flash 50 - Fixed Numbers Flash 51 - Flexible Numbers
XXX - XXX PAGE B
ENTER BUTTON NUMBER
SXXX PAGE B
ENTER BUTTON NUMBER
XXX-XXX = fixed station range XXX = 3- or 4-digit flexible number
SCHOOL ZONE 0-2
DISABLED
SCHOOL MODE 0, 6, 7, 8, 9
DISABLED
To Next Page
