School Zone 2-269
Features and Operation
STARPLUS STSe - Programming & Operations Manual August 2005
5. Press the SCHOOL FORWARD DEST flexible button (Button #11). The following message
displays:
6. Enter a valid destination number. Valid entries include station numbers, hunt groups,
UCD groups, and Voice Mail groups.
7. Press [HOLD]. A confirmation tone sounds.
DEFAULT … The School Mode is Disabled (0) and the School Forward Destination is not
assigned (####).
Operation
To control School Zone call forwarding (at an Administrator station):
1. Dial [630] + a call forward condition code (0 or 6-9) + a valid destination number
Call Forward Condition Codes: Valid Destinations:
0 = Disabled Station Numbers
6 = All Call Forward Hunt Groups
7 = No Answer Call Forward UCD Groups
8 = Busy Call Forward Voice Mail Groups
9 = Busy / No Answer Call Fwd
2. Press [HOLD]. A confirmation tone sounds.
To view the call forwarding status of Classroom telephones:
1. The Administrator uses a station assigned as an Administrator station and dials feature
code [630] + [#]. Confirmation tone sounds and LCD shows one of the following:
2. Press [ON/OFF] to return to an idle status.
SCHOOL FORWARD DEST
####
CLASSROOM STATUS
DISABLE
CLASSROOM STATUS
BSY FWD TO XXXX
CLASSROOM STATUS
NA FWD TO XXXX
CLASSROOM STATUS
B/NA FWD TO XXXX
CLASSROOM STATUS
FWD TO XXXX
To Next Page
Loading...
