wc_tx001951gb.fm
71
E 3000 Operation
Continued from the previous page.
10.Move valve #3 to the normal position.
11.Remove the fill hose from the HTF container and allow any HTF within the hose
to drip back into the container. Cap the fill hose if a cap is provided.
12.Move the fill hose to its storage location under the hose reel.
13.Open valve #2 and close valve #3 simultaneously.
Result
The low HTF level fault has been reset and the HTF reservoir has now been filled.
You may now resume operation of the machine.
To Next Page
Loading...
