PergoTex II/ PergoTex II LED
Instructions for assembly
We reserve the right to make technical changes
Note:
If, as a result of the permissible stretching,
the fabric is not parallel to the guttering or
does not drain rainwater to the guttering
reliably, it can be adjusted by shifting the
transom fixation.
The fabric position can be adjusted as
shown below:
Loosen screws M10x16 (4) on the 1.
transom fixation.
Shift transom fixation (see fig. 7). 2.
Tighten screws M10x16 (4) once again. 3.
Figure 7: Alignment of the fabric