Settings
PEGASUS WING User Manual
70
Audio Files
a. The lower section of the display and the AUDIO control panel button flash.
b. Use the arrow buttons to select the user level on which you wish to save the
AUDIO file. There are 100 levels each with 10 storage places available, which means, of
course, that 1000 AUDIO files can be loaded.
c. Now select the storage place you want and the AUDIO file is saved onto the instrument.
A message appears to that effect. Storage places already occupied can simply be
overwritten.
d. Confirm with OK .
Tip: If you press the button again, a
full list of all AUDIO files already
stored on the 100 levels appears.
Chose a storage place in this list and
then confirm with
Load Audio.
If you already know the required
storage place number, you can input
the 4 digit number with the numeric
keypad 0018.
The storage place numbers are tied to the 100 levels. An Audio file stored in place
number 0089 appears later in level 9 on button 9. The first 3 digits indicate the level
number, but you you must always count one number higher, as the levels begin with 1
and not with 0.
0089= level 9 place 9 0125= level 13 place 5 0992= level 100 place 2
Whether you load the Audio file directly with the display buttons or via the list, the result
is the same.