Device Parameters
TCP/IP Settings
Within menu
»Device Para / TCP/IP/TCP/IP Config«
the TCP/IP settings have to be set.
The first-time setting of the TCP/IP Parameters can be done at the panel (HMI) only.
Establishing a connection via TCP/IP to the device is only possible if your
device is equipped with an Ethernet Interface (RJ45).
Contact your IT administrator in order to establish the network connection.
Set the TCP/IP Parameters
Call up
»Device parameter/TCP/IP«
at the HMI (panel) and set the following parameters:
TCP/IP address
Subnetmask
Gateway
477 MCDGV4 DOK-HB-MCDGV4-2E
To Next Page
Loading...
