Xerox 4595 Copier/Printer System Administration Guide
8-41
8. Setups
Auto Size Detect Standard-sized paper loaded in trays 3, 4, and optional 6 and 7 is
automatically detected.
Variable Size When setting a non-standard size for trays 3 and 4, set the size in
the X (horizontal) direction within the range of 182-488 mm (7.17-
19.21 in.) and in the Y (vertical) direction within the range 148-330
mm (5.82-13 in.) in 1 mm increments. For optional trays 6 and 7,
set the size in the X direction within the range 210-241 mm (8.26-
9.48 in.) and in the Y direction within the range 297-330 mm
(11.69-12 in.) in 1 mm increments.
b. From the Paper Size screen, select Save to save the
paper size and return to previous screen.
5. Select either Paper Type or Save.
• If you select Save, you are returned to the Paper Tray
Attributes screen. Proceed to Step 7.
• If you select Paper Type, proceed to the next step.