Xerox 4595 System Administration Guide

Xerox 4595 Copier/Printer System Administration Guide
8-144
8. Setups
3. Select the desired setting for the item.
4. Select Save.
5. Repeat Steps 1-4 for the remaining items.
6. From the Address Search (Directory Service) screen, select
Close to return to the E-mail Settings screen.
Directory Service (LDAP) Select whether or not to allow the use of address books stored on
the directory server. Select either Disabled or Enabled.
KEY POINT: Even when Enabled is selected, unless the following
conditions are met, the directory server address book will not be
started:
– The IP address must be correctly set
– The directory server (primary) IP address or Internet
address must be set
– The port number used for LDAP communications must be
set
Primary Server Select the default directory server settings using the following
procedure.
1. From the Address Search (Directory Service) screen, select
Primary Server.
2. Select the item to be set, and select Change Settings.
3. Select the desired value for that item.
• Primary Server Setup: Select the primary server
specification method either By IP Address or By Server
Name.
• Primary Server IP Address: Set the primary server IP
address using values between 0-255.
NOTE:Use this feature when the Primary Server Setup
setting is By IP Address.

Xerox 4595 Specifications

General

Brand	Xerox
Model	4595
Category	Copier
Language	English