6Setups
100
• IEEE 802.1x
Specifies whether to enable IEEE 802.1x authentication.
• Authentication Method
Specifies the IEEE 802.1x authentication method.
• Login User Name
Specifies the login user name for IEEE 802.1x authentication.
• Login Password
Specifies the password for the login user name specified in [Login User Name].
• Server Certificate Verification
Specifies whether to verify the server certificate. This setting is valid when
[PEAP/MS-CHAPv2] is selected in [Authentication Method].
Other Settings
This feature allows you to set the e-mail receiving protocol and the output tray for e-
mail printing.
1.
Select [Other Settings] in the
[Features] menu.
2.
Change the required setting.
3.
Select [Close].
E-mail Receive Protocol
Specifies the protocol for receiving e-mail. Select from [SMTP] or [POP3].
Output Destination for E-mail
Specifies the output tray for e-mail printing. The available options vary depending on
the machine configuration. Selecting [Auto] sets to the default output tray.
Print Service Settings
This section describes the features that allow you to change the default settings for the
printer configuration. For more information, refer to the following:
Allocate Memory – page 101
Other Settings – page 103
1.
Select [System Settings], and
then select [Print Service
Settings] in the [Group] menu.
To Next Page
Loading...
Need help?
General
