Xerox 5222 User Manual

6Setups
92
SNMP
Specifies whether to enable the SNMP agent.
FTP Client
Specifies whether to enable the FTP Client port.
Receive E-mail
Specifies whether to enable the mail receiving port.
Send E-mail
Specifies whether to enable the mail transmission port.
E-mail Notification Service
Specifies whether to enable the mail notification service.
UPnP Discovery
Specifies whether to enable the UPnP port, and specifies the port number.
WSD
Specifies whether to enable the WSD port, and specifies the port number.
Internet Services
Specifies whether to enable the Internet Services port, and specifies the port number.
SOAP
Specifies whether to enable the SOAP port, and specifies the port number to
communicate with external applications.
WebDAV
Specifies whether to enable the WebDAV port, and specifies the port number and
operation time limit.
Protocol Settings
This feature allows you to configure the machine settings that correspond with the
protocol being used.
1. Select [Protocol Settings] in the
[Features] menu.
2. Change the required settings.
Use the scroll buttons to switch
between screens.
3. Select [Close].
Ethernet Rated Speed
Specifies the Ethernet port speed according to the network environment to which the
machine is connected.
TCP/IP - IP Mode
Specifies the IP operation mode. Selecting [Dual Stack] enables both IPv4 and IPv6
communications.

Xerox 5222 Specifications

General

Print Technology	Laser
Print Speed	22 ppm
Standard Paper Capacity	250 sheets
Copy Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Connectivity	USB, Ethernet
Copy Speed	22 cpm
Scan Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Supported Operating Systems	Windows, Mac OS, Linux
Monthly Duty Cycle	30, 000 pages