Xerox 5222 User Manual

Selecting Transport Protocols
151
Selecting Transport Protocols
When using the NetWare, SMB, or SNMP port, change the transport protocol if
required.
• NetWare: IPX/SPX, TCP/IP
• SMB: NetBEUI, TCP/IP
• SNMP: UDP, IPX
1. On the CentreWare Internet Services home page for the machine, select the
[Properties] tab.
2. In the [Properties] frame, select [Port Status].
3. Select the required transport protocol.
NetWare: IPX/SPX, TCP/IP
SMB: NetBEUI, TCP/IP
SNMP: UDP, IPX
4. Select [Apply].
Screen Layout
The CentreWare Internet Services home
page contains four panels without visible
boundaries. You can change the left and right
panel sizes by dragging the boundary
between them.
Header Panel
Displays the header for all pages. The header
includes the CentreWare Internet Services
logo and the model of the machine. Just under
this panel on most pages is the tab bar which
corresponds to the five functions or page buttons. These are [Status], [Jobs], [Print],
[Scan], [Properties], and [Support]. You can navigate through the pages when you click
the text on each tab.
Logo Panel
Displays the company logo.
Menu Panel
Displays a navigation tree, listing the items available within each category, with the
currently displayed item highlighted.
Header Panel
Main Panel
Menu
Panel
Logo
Panel

Xerox 5222 Specifications

General

Print Technology	Laser
Print Speed	22 ppm
Standard Paper Capacity	250 sheets
Copy Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Connectivity	USB, Ethernet
Copy Speed	22 cpm
Scan Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Supported Operating Systems	Windows, Mac OS, Linux
Monthly Duty Cycle	30, 000 pages
Max Print Resolution	Up to 1200 x 1200 dpi