Xerox 5222 User Manual

8 Printer Environment Settings
228
NetWare
This section explains how to install the machine onto a NetWare network. The following
information is provided:
Information Checklist – page 228
NetWare Environments – page 228
NetWare Installation – page 229
Installation Procedure – page 229
Network Communication Setup – page 230
NetWare Setup – page 231
Computer Setup – page 231
Test Print – page 231
Information Checklist
Before installing the machine onto a network, make sure that the following items are
available or have been performed.
If problems arise during the machine installation, refer to
Problem Solving on page 341 .
for assistance.
NetWare Environments
System configuration
The machine supports NetWare PServer mode in Bindery or NDS. NetWare 3.x/4.x/
5.x/6.x is required to support Bindery. NetWare 4.11 or later is required to support NDS.
In the PServer mode, the machine will function as a print server and print jobs from the
print queue. The machine uses one file server user license.
NOTE: The machine does not support RPrinter mode.
Item By
An existing operational NetWare network is required. These procedures
are not designed to install a NetWare network.
Customer
NetWare versions 3.x, 4.x, 5.x or 6.x Customer
Obtain and record the following information, if required:
• IPv4 address
• Gateway address
• Subnet mask
•Host name
NOTE: Only the IPv4 format is available for addresses.
Customer
Test the machine to make sure that it is fully installed and functioning
correctly.
Customer
Install the print driver. Customer

Xerox 5222 Specifications

General

Print Technology	Laser
Print Speed	22 ppm
Standard Paper Capacity	250 sheets
Copy Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Connectivity	USB, Ethernet
Copy Speed	22 cpm
Scan Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Supported Operating Systems	Windows, Mac OS, Linux
Monthly Duty Cycle	30, 000 pages