Xerox 5222 User Manual

3 Maintenance
34
Inserting the New Toner Cartridge
1. Remove the new toner cartridge
from the box. Before removing
the cartridge from the bag,
shake it from side to side to
evenly distribute the toner
inside.
2. Insert the cartridge as shown in
the illustration, and slide it into
the machine until it clicks.
3. Close the front cover.
NOTE: If the front cover is not
completely closed, a message will
appear and the machine will not
operate.
Loading Staples in the Integrated Office Finisher (Optional)
The Integrated Office Finisher contains an automatic stapler. When the finisher runs
out of staples, a message appears on the touch screen. When this message is
displayed, load a new staple case into the staple cartridge.
1. Make sure that the machine is
not operating, and open the
front cover of the finisher.
2. Take the staple cartridge out of
the finisher.

Xerox 5222 Specifications

General

Print Technology	Laser
Print Speed	22 ppm
Standard Paper Capacity	250 sheets
Copy Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Connectivity	USB, Ethernet
Copy Speed	22 cpm
Scan Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Supported Operating Systems	Windows, Mac OS, Linux
Monthly Duty Cycle	30, 000 pages