Status
155
Paper Type
Displays the type of paper loaded in each tray.
Priority
Displays the priority set for each tray when Auto Tray Switching is selected. The highest
priority is number 1. The greater the number, the lower the priority.
Output Destination
Trays
Lists the available output trays.
NOTE: Trays displayed will depend on the configuration.
Status
Displays the status of each output tray.
NOTE: If the output tray becomes full, remove the stack from the output tray.
Consumables
The consumables menu displays the status of the toner cartridge, drum cartridge, and
other consumables. The status indicates when to replace each consumable.
Consumables
Toner Cartridges
Displays the status of the toner cartridge as [OK], [Reorder], [Replace], or [Fault]. It also
displays the remaining toner in percentages.
NOTE: If [Replace] is displayed, replace the toner cartridge.
NOTE: Once a new toner cartridge is installed, a status will be displayed as [Ready].
SMart Kits
Drum Cartridges
Displays the status of the drum cartridge as [OK], [Reorder], [Replace], or [Fault]. It also
displays the remaining drum life in percentages.
NOTE: If [Replace] is displayed, replace the drum cartridge.
Staple Cartridge
Displays the status of the staple cartridge as [OK], [Reorder], [Replace], or [Fault].
NOTE: If [Replace] is displayed, replace the staple cartridge.
To Next Page
Loading...
Need help?
General
