6Setups
98
• HTTP - SSL/TLS Communication
Specifies whether to enable SSL/TLS communications.
• HTTP - SSL/TLS Port Number
Specifies the SSL/TLS communications port number.
• LDAP - SSL/TLS Communication
Specifies whether to enable SSL/TLS communication using LDAP.
• Device Certificate - Client
Specifies the client certificate to attach to the E-mail address.
• Verify Remote Server Certificate
Specifies whether to enable verification of the remote server certificate.
S/MIME Settings
Specifies the S/MIME settings. Use the scroll buttons to switch between screens.
• Device Certificate - S/MIME
Specifies the S/MIME certificate to attach to the E-mail address.
• S/MIME Communication
Specifies whether to enable S/MIME communications.
• Receive Untrusted E-mail
Specifies whether to receive an untrusted E-mail. Select [No] to block a non-S/MIME
E-mail when S/MIME communication is enabled, and to block an E-mail with an
incorrect signature/validation.
• Receive Untrusted Internet Fax
Specifies whether to receive an untrusted Internet Fax. Select [No] to block a non-
S/MIME Internet Fax when S/MIME communication is enabled, and to block an
Internet Fax with an incorrect signature/validation.
• Message Digest Algorithm
Specifies the message digest algorithm. Select from [SHA1] and [MD5].
• Message Encryption Method
Specifies the message encryption method. Select from [3DES], [RC2-40], [RC2-64],
and [RC2-128].
• Digital Signature - Outgoing E-mail
Specifies whether to add a digital signature to an outgoing E-mail or to prompt the
user to add the signature.
• Signature - Outgoing Internet Fax
Specifies whether to add a signature to an outgoing Internet Fax or to prompt the
user to add the signature.
• Certificate Auto Store
Specifies the client certificate to attach to the E-mail address.
PDF/XPS Signature Settings
Specifies the PDF/XPS signature settings.
NOTE: XPS stands for XML Paper Specification.
To Next Page
Loading...
Need help?
General
