Xerox Phaser 3200MFP User Manual

6Printing
Xerox Phaser 3200MFP 6-27
Sharing the Printer Locally
You can connect the printer directly to a selected computer, which is called
“host computer,” on the network.
The following procedure is for Windows XP. For other Windows OS, refer to
the corresponding Windows User's Guide or online help.
NOTE:
• Check the Operating System(s) that are compatible with your printer.
Please refer to the OS Compatibility section of Printer Specifications. See
Printer Specifications on page 11-4.
Setting Up a Host Computer
1. Start Windows.
2. From the Start menu select Printers and Faxes.
3. Double-click your printer driver icon.
4. From the Printer menu, select Sharing.
5. Check the Share this printer box.
6. Fill in the Shared Name field, and then click OK.
Setting Up a Client Computer
1. Right-click the Windows Start button and select Explorer.
2. Open your network folder in the left column.
3. Click the shared name.
4. From the Start menu select Printers and Faxes.
5. Double-click your printer driver icon.
6. From the Printer menu, select Properties.
7. From the Ports tab, click Add Port.
8. Select Local Port and click New Port.
9. Fill in the Enter a Port Name field with the shared name.
10. Click OK and click Close.
11. Click Apply and click OK.

Xerox Phaser 3200MFP Specifications

General

Brand	Xerox
Model	Phaser 3200MFP
Category	All in One Printer
Language	English