Xerox Phaser 3200MFP User Manual

2 Getting Started
Xerox Phaser 3200MFP 2-23
To open ControlCentre:
1. Start your Windows.
2. Click the Start button on your desktop computer.
3. From the Programs or All Pro-
grams, select your printer driver
name and then ControlCentre.
The ControlCentre window opens.
The ControlCentre window
provides the following tabs: Scan
Settings, Phonebook, Printer,
and Firmware Update.
4. To exit, click the Exit button at the
bottom of each tab.
NOTE: Use the help feature by
referring to the window which appears when you click the Help button.
The Scan Settings Tab
Click the Scan Settings tab to configure the scan destination list. Scan the
image to any of the software programs in the destination list.
You can also configure the scan
settings, such as the output type and
resolution.
Select the program from the
Available Scan Destinations and click
to add it to the Front Panel
Destination List. To delete the selected
program, click .
Restore Defaults
Click to restore the default settings.
Send
Downloads the settings made in the
ControlCentre to your machine.
1
2
3
1
2
3

Xerox Phaser 3200MFP Specifications

General

Brand	Xerox
Model	Phaser 3200MFP
Category	All in One Printer
Language	English