Xerox Phaser 3200MFP User Manual

6Printing
6-48 Xerox Phaser 3200MFP
Uninstalling the Scan driver
1. Insert the CD-ROM which came with your printer into the CD-ROM drive.
2. Double-click CD-ROM icon that appears on your Macintosh desktop.
3. Double-click the MAC_Installer folder.
4. Double-click the MAC_TWAIN folder.
5. Double-click the Xerox ScanThru Installer icon.
6. Enter the password and click OK.
7. Click Continue.
8. Select Uninstall from the Installation Type and then Click Uninstall.
9. Click Continue.
10. When the uninstallation is complete, click Quit.
Setting Up the Printer
Set up for your printer will be different depending on which cable you use to
connect the printer to your computer—the network cable or the USB cable.
For a Network-connected Macintosh
1. Follow the instructions on Installing Software for Macintosh on page 6-46
to install the PPD and Filter files on your computer.
2. Open Print Center or Printer Setup Utility from the Utilities folder.
3. Click Add on the Printer List.
4. Select the AppleTalk tab.
The name of your machine appears on the list. Select XRX000xxxxxxxxx
from the printer box, where the xxxxxxxxx varies depending on your
machine.
5. Click Add.
6. If Auto Select does not work properly, select Xerox in Printer Model and
your printer name in Model Name.
Your machine appears on the Printer List and is set as the default printer.

Xerox Phaser 3200MFP Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Resolution	Up to 600 x 600 dpi
First Page Out Time	Less than 10 seconds
Copy Resolution	Up to 600 x 600 dpi
Maximum Copy Count	99 copies
Fax Transmission Speed	33.6 kbps
Standard Paper Capacity	250 sheets
Connectivity	USB 2.0
Memory	32 MB
Operating System Compatibility	Windows, Mac OS
Duplex Printing	Manual
Scan Type	Flatbed
Media Sizes Supported	Letter, Legal, Executive, A4, A5
Media Weight	60 to 163 g/m²
Monthly Duty Cycle	10, 000 pages
Toner Yield	Up to 3, 000 pages