Xerox Phaser 3200MFP User Manual

6Printing
Xerox Phaser 3200MFP 6-41
4. Change the printer and print job properties.
The following four tabs display at the top of the window.
• General - allows you to change the paper size, the paper type, and the
orientation of the documents, enables the duplex feature, adds start and
end banners, and changes the number of pages per sheet.
• Text - allows you to specify the page margins and set the text options,
such as spacing or columns.
• Graphics - allows you to set image options that are used when printing
images/files, such as color options, image size, or image position.
• Device - allows you to set the print resolution, paper source, and
destination.
5. Click Apply to apply the changes and close the Phaser 3200MFP
Properties window.
6. Click OK in the LPR GUI window to start printing.
7. The Printing window appears, allowing you to monitor the status of your
print job.
8. To abort the current job, click Cancel.
Printing Files
You can print many different types of files on the Xerox machine device using
the standard CUPS way - directly from the command line interface. The CUPS
lpr utility allows you do that. But the drivers package replaces the standard lpr
tool by a much more user-friendly LPR GUI program.
To print any document file:
1. Type lpr <file_name> from the Linux shell command line and press Enter.
The LPR GUI window appears.

Xerox Phaser 3200MFP Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Resolution	Up to 600 x 600 dpi
First Page Out Time	Less than 10 seconds
Copy Resolution	Up to 600 x 600 dpi
Maximum Copy Count	99 copies
Fax Transmission Speed	33.6 kbps
Standard Paper Capacity	250 sheets
Connectivity	USB 2.0
Memory	32 MB
Operating System Compatibility	Windows, Mac OS
Duplex Printing	Manual
Scan Type	Flatbed
Media Sizes Supported	Letter, Legal, Executive, A4, A5
Media Weight	60 to 163 g/m²
Monthly Duty Cycle	10, 000 pages
Toner Yield	Up to 3, 000 pages