EasyManuals Logo

Xerox Phaser 3200MFP User Manual

Xerox Phaser 3200MFP
236 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #146 background imageLoading...
Page #146 background image
8 Faxing
8-2 Xerox Phaser 3200MFP
Setting Up the Fax System
Changing the Fax Setup options
1. Press Menu until “Fax Setup” appears on the top line of the display.
The first available menu item, “Receive Mode”, displays on the bottom
line.
2. Press the scroll button ( or ) until you see the desired menu item on the
bottom line and press Enter.
If you select “Receive Mode”, you will see “Resolution”.
3. Use the scroll button ( or ) to find the desired status or use the number
keypad to enter the value for the option you have selected.
4. Press Enter to make your selection. The next Fax Setup option appears.
5. If necessary, repeat steps 2 through 4.
6. To return to Standby mode, press Stop/Clear.
Available Fax Setup Options
Option Description
Receive Mode
You can select the default fax receiving mode.
In Tel mode, you can receive a fax by picking up the
handset of the extension phone and then pressing the
remote receive code (see
Receive Code on page 8-3).
Alternatively, you can press
Manual Dial
(you can hear a fax
tone from the remote machine) and then press
Start
on the
control panel of your machine.
In the
Fax
mode,
the machine answers an incoming call and
immediately goes into fax reception mode.
In Ans/Fax mode, the answering machine answers an
incoming call, and the caller can leave a message on the
answering machine. If the fax machine senses a fax tone on
the line, the call automatically switches to Fax mode.
In DRPD mode, you can receive a call using the Distinctive
Ring Pattern Detection (DRPD) feature. This option is
available only when you set up the DRPD Mode. For further
details, see
Receiving Faxes Using the DRPD Mode on
page 8-11
.
Ring To Answer
You can specify the number of times the machine rings,
from 1 to 7, before answering an incoming call.
Lighten/Darken
You can select the default contrast mode to fax your
documents lighter or darker.
Lighten works well with dark print.
Normal works well with standard typed or printed
documents.
Darken works well with light print or faint pencil markings.

Table of Contents

Other manuals for Xerox Phaser 3200MFP

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox Phaser 3200MFP and is the answer not in the manual?

Xerox Phaser 3200MFP Specifications

General IconGeneral
Print TechnologyLaser
FunctionsPrint, Copy, Scan, Fax
Print ResolutionUp to 600 x 600 dpi
First Page Out TimeLess than 10 seconds
Copy ResolutionUp to 600 x 600 dpi
Maximum Copy Count99 copies
Fax Transmission Speed33.6 kbps
Standard Paper Capacity250 sheets
ConnectivityUSB 2.0
Memory32 MB
Operating System CompatibilityWindows, Mac OS
Duplex PrintingManual
Scan TypeFlatbed
Media Sizes SupportedLetter, Legal, Executive, A4, A5
Media Weight60 to 163 g/m²
Monthly Duty Cycle10, 000 pages
Toner YieldUp to 3, 000 pages

Related product manuals