Xerox Phaser 3200MFP User Manual

6Printing
Xerox Phaser 3200MFP 6-39
Sharing Ports Between Printers and Scanners
Your machine can be connected to a host computer via the parallel port or
USB port. Since the MFP device contains more than one device (printer and
scanner), it is necessary to organize proper access of “consumer” applications
to these devices via the single I/O port.
The Xerox Unified Linux Driver package provides an appropriate port sharing
mechanism that is used by the Xerox printer and scanner drivers. The drivers
address their devices via so-called MFP ports. The current status of any MFP
port can be viewed via the MFP Ports Configuration. The port sharing prevents
you from accessing one functional block of the MFP device, while another
block is in use.
When you install a new MFP printer onto your system, it is strongly
recommended you do this with the assistance of an Unified Driver
Configurator. In this case you will be asked to choose I/O port for the new
device. This choice will provide the most suitable configuration for MFP’s
functionality. For MFP scanners I/O ports are being chosen by scanner drivers
automatically, so proper settings are applied by default.
Configuring Printer Properties
You can change the various properties for your machine as a printer using the
properties window provided by the Printers configuration.
1. Open the Unified Driver Configurator.
If necessary, switch to Printers configuration.
2. Select your machine on the available printers list and click Properties.
3. The Printer Properties win-
dow opens.
The following five tabs
display at the top of the
window:
• General: allows you to
change the printer location
and name. The name entered
in this tab displays on the
printer list in Printers
configuration.
• Connection: allows you to view or select another port. If you change the
printer port from USB to parallel or vice versa while in use, you must re-
configure the printer port in this tab.
• Driver: allows you to view or select another printer driver. Click Options
to set the default device options.

Xerox Phaser 3200MFP Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Resolution	Up to 600 x 600 dpi
First Page Out Time	Less than 10 seconds
Copy Resolution	Up to 600 x 600 dpi
Maximum Copy Count	99 copies
Fax Transmission Speed	33.6 kbps
Standard Paper Capacity	250 sheets
Connectivity	USB 2.0
Memory	32 MB
Operating System Compatibility	Windows, Mac OS
Duplex Printing	Manual
Scan Type	Flatbed
Media Sizes Supported	Letter, Legal, Executive, A4, A5
Media Weight	60 to 163 g/m²
Monthly Duty Cycle	10, 000 pages
Toner Yield	Up to 3, 000 pages