Xerox Phaser 3200MFP User Manual

6Printing
6-18 Xerox Phaser 3200MFP
3. Configure the poster option:
can select the page layout from 2x2 , 3x3 , 4x4 or Custom . If you select 2x2 ,
the output will be automatically stretched to cover 4 physical pages. If the
option is set to Custom, you can enlarge the original from 150% to 400%.
Depending on the level of the enlargement, the page layout is automatically
adjusted to
2x2 , 3x3 , 4x4 .
Specify an overlap in millimeters or inches to make it easier to paste the
sheets together.
4. Click the Paper tab, select the paper source, size, and type.
5. Click OK and print the document. You can complete the poster by pasting
the sheets together.
Printing a Reduced or Enlarged Document
You can change the size of a page’s content to appear larger or smaller on the
printed page.
1. To change the print settings from your software application, access
printer properties. See Basic Printing on page 6-6.
2. From the Paper tab, select Reduce/Enlarge in the Printing Type drop-
down list.
2x2
3x3
0.15 inches
0.15 inches

Xerox Phaser 3200MFP Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Resolution	Up to 600 x 600 dpi
First Page Out Time	Less than 10 seconds
Copy Resolution	Up to 600 x 600 dpi
Maximum Copy Count	99 copies
Fax Transmission Speed	33.6 kbps
Standard Paper Capacity	250 sheets
Connectivity	USB 2.0
Memory	32 MB
Operating System Compatibility	Windows, Mac OS
Duplex Printing	Manual
Scan Type	Flatbed
Media Sizes Supported	Letter, Legal, Executive, A4, A5
Media Weight	60 to 163 g/m²
Monthly Duty Cycle	10, 000 pages
Toner Yield	Up to 3, 000 pages