Xerox Phaser 3200MFP User Manual

9 Maintenance
Xerox Phaser 3200MFP 9-5
6. Locate the long strip of glass
(LSU) inside the top of the
cartridge compartment. Gently
wipe the glass to remove any
toner.
7. Re-insert the manual tray, print
cartridge and close the door.
8. Plug in the power cord and
switch on the machine.
Cleaning the Scan Unit
Keeping the scan unit clean helps ensure the best possible scanned images.
We suggest that you clean the scan unit at the start of each day and during
the day, as needed.
1. Slightly dampen a soft lint-free cloth or paper towel with water.
2. Open the document cover.
3. Wipe the surface of the document glass and ADF glass until it is clean
and dry.
4. Wipe the underside of the white document cover and white bar until it is
clean and dry.
5. Close the document cover.
Document cover
Document glass
White bar
ADF glass

Xerox Phaser 3200MFP Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Resolution	Up to 600 x 600 dpi
First Page Out Time	Less than 10 seconds
Copy Resolution	Up to 600 x 600 dpi
Maximum Copy Count	99 copies
Fax Transmission Speed	33.6 kbps
Standard Paper Capacity	250 sheets
Connectivity	USB 2.0
Memory	32 MB
Operating System Compatibility	Windows, Mac OS
Duplex Printing	Manual
Scan Type	Flatbed
Media Sizes Supported	Letter, Legal, Executive, A4, A5
Media Weight	60 to 163 g/m²
Monthly Duty Cycle	10, 000 pages
Toner Yield	Up to 3, 000 pages