Xerox Phaser 3200MFP User Manual

9 Maintenance
9-10 Xerox Phaser 3200MFP
Consumables Parts
From time to time, you need to replace the Print Cartridge to maintain optimum
performance and to avoid print quality problems.
The following items should be replaced after you have printed the specified
number of pages:
To purchase consumables parts, contact your Dealer or Service Agent or the
Retailer where you bought your machine. We strongly recommend that these
items are installed by a trained service professional, except for the print
cartridge.
For the print cartridge refer to Replacing the Print Cartridge on page 9-7.
Replacement Parts
From time to time, you need to replace the ADF Rubber Pad to maintain
optimum performance and to avoid print quality problems and paper feed
problems resulting from worn parts.
The following item should be replaced after you have printed the specified
number of pages:
NOTE: If a ADF rubber pad is required, please contact your dealer or Xerox
representative.
For the ADF rubber pad refer to Replacing the ADF Rubber Pad on page 9-11.
Items Yield (Average)
Print Cartridge (initial) Approx. 1,500 pages
Print Cartridge (replacement)
Approx. 2,000 pages
Approx. 3,000 pages
Items Yield (Average)
ADF rubber pad Approx. 20,000 pages

Xerox Phaser 3200MFP Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Resolution	Up to 600 x 600 dpi
First Page Out Time	Less than 10 seconds
Copy Resolution	Up to 600 x 600 dpi
Maximum Copy Count	99 copies
Fax Transmission Speed	33.6 kbps
Standard Paper Capacity	250 sheets
Connectivity	USB 2.0
Memory	32 MB
Operating System Compatibility	Windows, Mac OS
Duplex Printing	Manual
Scan Type	Flatbed
Media Sizes Supported	Letter, Legal, Executive, A4, A5
Media Weight	60 to 163 g/m²
Monthly Duty Cycle	10, 000 pages
Toner Yield	Up to 3, 000 pages