Xerox Phaser 3200MFP User Manual

2 Getting Started
2-4 Xerox Phaser 3200MFP
Installing the Print Cartridge
1. Open the front door.
2. Remove the Print Cartridge
from its bag and remove the paper
protecting the cartridge by pulling the
packing tape.
3. Thoroughly rock the cartridge 5 or 6
times to distribute the toner. This will
loosen the toner and make sure that
you get the maximum copies from the
cartridge.
NOTE: If toner gets on your clothing, wipe it
off with a dry cloth and wash clothing in cold
water. Hot water sets toner into fabric.
CAUTION: To prevent damage, do not expose the Print Cartridge to
light for more than a few minutes. Cover it with a piece of paper if left
exposed for more than a few minutes.
CAUTION: Do not touch the green underside of the Print Cartridge. Use
the handle on the cartridge when lifting the cartridge to avoid touching
this area.

Xerox Phaser 3200MFP Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Resolution	Up to 600 x 600 dpi
First Page Out Time	Less than 10 seconds
Copy Resolution	Up to 600 x 600 dpi
Maximum Copy Count	99 copies
Fax Transmission Speed	33.6 kbps
Standard Paper Capacity	250 sheets
Connectivity	USB 2.0
Memory	32 MB
Operating System Compatibility	Windows, Mac OS
Duplex Printing	Manual
Scan Type	Flatbed
Media Sizes Supported	Letter, Legal, Executive, A4, A5
Media Weight	60 to 163 g/m²
Monthly Duty Cycle	10, 000 pages
Toner Yield	Up to 3, 000 pages