Xerox Phaser 3200MFP User Manual

8 Faxing
8-8 Xerox Phaser 3200MFP
Confirming Transmission
When the last page of your document has been sent successfully, the
machine beeps and returns to Standby mode.
If your fax fails, an error message appears on the display. For a list of error
messages and their meanings, see Clearing LCD Error Messages on page 10-9.
If you receive an error message, press Stop/Clear to clear the message and
try to send the document again.
You can set your machine to print a confirmation report automatically each
time sending a fax is completed. For further details, see the MSG Confirm item
on MSG Confirm on page 8-3.
Automatic Redialing
When the number you have dialed is busy or there is no answer when you
send a fax, the machine automatically redials the number every three minutes,
up to seven times according to the factory default settings.
When the display shows “Retry Redial?”, press Enter to redial the number
without waiting. To cancel the automatic redialing, press Stop/Clear.
To change the time interval between redials and the number of redial
attempts. See Redial Term on page 8-3.

Xerox Phaser 3200MFP Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Resolution	Up to 600 x 600 dpi
First Page Out Time	Less than 10 seconds
Copy Resolution	Up to 600 x 600 dpi
Maximum Copy Count	99 copies
Fax Transmission Speed	33.6 kbps
Standard Paper Capacity	250 sheets
Connectivity	USB 2.0
Memory	32 MB
Operating System Compatibility	Windows, Mac OS
Duplex Printing	Manual
Scan Type	Flatbed
Media Sizes Supported	Letter, Legal, Executive, A4, A5
Media Weight	60 to 163 g/m²
Monthly Duty Cycle	10, 000 pages
Toner Yield	Up to 3, 000 pages