Xerox Phaser 3200MFP User Manual

6Printing
Xerox Phaser 3200MFP 6-47
Uninstalling the Printer driver
Uninstall is required if you are upgrading the software, or if installation fails.
1. Insert the PostScript driver CD-ROM which came with your machine into
the CD-ROM drive.
2. Double-click the Xerox MFP on your Macintosh desktop.
3. Double-click the MAC_Installer folder.
4. Double-click the MAC_Printer folder.
5. Double-click the Xerox Phaser 3200MFP_OSX icon.
6. Click Continue.
7. Select Uninstall and then click Uninstall.
8. When the uninstallation is complete, click Quit.
Installing the Scan driver
1. Make sure that you connect your printer to the computer. Turn on your
computer and printer.
2. Insert the CD-ROM which came with your printer into the CD-ROM drive.
3. Double-click CD-ROM icon that appears on your Macintosh desktop.
4. Double-click the MAC_Installer folder.
5. Double-click the MAC_TWAIN folder.
6. Double-click the Xerox ScanThru Installer icon.
7. Enter the password and click OK.
8. Click Continue.
9. Click Install.
10. Click Continue.
11. After the installation is finished, click Quit.

Xerox Phaser 3200MFP Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Resolution	Up to 600 x 600 dpi
First Page Out Time	Less than 10 seconds
Copy Resolution	Up to 600 x 600 dpi
Maximum Copy Count	99 copies
Fax Transmission Speed	33.6 kbps
Standard Paper Capacity	250 sheets
Connectivity	USB 2.0
Memory	32 MB
Operating System Compatibility	Windows, Mac OS
Duplex Printing	Manual
Scan Type	Flatbed
Media Sizes Supported	Letter, Legal, Executive, A4, A5
Media Weight	60 to 163 g/m²
Monthly Duty Cycle	10, 000 pages
Toner Yield	Up to 3, 000 pages