Xerox Phaser 3200MFP User Manual

10 Troubleshooting
Xerox Phaser 3200MFP 10-19
Vertical lines If black vertical streaks appear on the page:
The drum inside the print cartridge has probably been
scratched. Remove the print cartridge and install a new one.
Replacing the Print Cartridge on page 9-7.
If white vertical streaks appear on the page:
The surface of the LSU part inside the machine may be dirty.
Clean the LSU (
Cleaning the Inside on page 9-3).
Contact a service representative.
Gray background If the amount of background shading becomes
unacceptable:
Change to a lighter weight paper.
Paper Specifications on
page 11-6
.
Check the machine’s environment: very dry (low humidity) or
high humidity (higher than 80% RH) conditions can increase
the amount of background shading.
Remove the old print cartridge and install a new one.
Replacing the Print Cartridge on page 9-7.
Toner smear Clean the inside of the machine. Cleaning the Inside on
page 9-3
.
Check the paper type and quality.
Paper Specifications on
page 11-6
.
Parts of the machine may have toner on them. If defects
occur, the problem will likely correct itself after running five
(5) blank sheets.
Remove the print cartridge and install a new one.
Replacing
the Print Cartridge on page 9-7
.
Vertical repetitive
defects
If marks repeatedly appear on the printed side of the page at
even intervals:
The print cartridge may be damaged. If a repetitive mark
occurs on the page, print a cleaning sheet several times to
clean the cartridge;
Cleaning the Drum on page 9-9. After
the printout, if you still have the same problems, remove the
print cartridge and install a new one.
Replacing the Print
Cartridge on page 9-7
.
Parts of the machine may have toner on them. If defects
occur, the problem will likely correct itself after running five
(5) blank sheets.
The fusing assembly may be damaged. Contact a service
representative.
If you use inferior quality paper;
Cleaning the Drum on
page 9-9
.
Condition Suggested solutions
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc

Xerox Phaser 3200MFP Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Resolution	Up to 600 x 600 dpi
First Page Out Time	Less than 10 seconds
Copy Resolution	Up to 600 x 600 dpi
Maximum Copy Count	99 copies
Fax Transmission Speed	33.6 kbps
Standard Paper Capacity	250 sheets
Connectivity	USB 2.0
Memory	32 MB
Operating System Compatibility	Windows, Mac OS
Duplex Printing	Manual
Scan Type	Flatbed
Media Sizes Supported	Letter, Legal, Executive, A4, A5
Media Weight	60 to 163 g/m²
Monthly Duty Cycle	10, 000 pages
Toner Yield	Up to 3, 000 pages