Xerox WorkCentre 4265 Service Manual

January 2016
4-85
WorkCentre 4150/4250/4260WorkCentre WorkCentre 4150/4250/42604150/
REP 5.23
Repairs and Adjustments
REP 5.23 DADF Components Cleaning (4265)
Clean
NOTE: This procedure should only be performed on the 4265 machine. The cleaning covers
DADF Feed Rollers, Idler Rollers, Plastic Film, the Scanner Glass and the two White Bars.
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
CAUTION
Do not allow the optics cavity to become contaminated. Contamination of the optics cavity can
cause image quality defects.
1. Power off the machine. Disconnect the power cord.
2. Open the Top Cover Assembly.
NOTE: Use Xerox anti-static fluid for cleaning all the rollers, glass, etc. in this procedure.
3. Clean the Feed Rollers (Figure 1).
Figure 1 Cleaning the Feed Rollers
2
Clean the two
Feed Rolls.
1
Lift up the Pickup Assembly.
3
Lower the Pickup Assembly.

Xerox WorkCentre 4265 Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax, Email
Print Resolution (Max)	Up to 1200 x 1200 dpi
Memory (Standard)	2 GB
Memory (Maximum)	2 GB
Connectivity	10/100/1000Base-T Ethernet, USB 2.0
Paper Output	250 sheets
Scan Resolution (Optical)	Up to 600 x 600 dpi
Fax Speed	33.6 Kbps
Media Sizes Supported	Legal, Letter
Mobile Printing	Apple AirPrint
Duplex Printing	Automatic
Display	7-inch color touchscreen