Xerox WorkCentre 7132 System Administration Guide

2 Product Overview
14 Xerox WorkCentre 7132 System Administration Guide
NOTE: Depending on the configuration, the Document Glass Cover is attached
instead of the Document Feeder. Two optional paper trays can be attached.
Telephone socket
Located at the back of the machine. The telephone socket is used to connect to the fax
kit.
USB 1.1 (Host) Port
Located at the back of the machine. This port is used to connect to the fax kit.
USB 1.1 (Device) Port
Located at the back of the machine. This port is used to connect to a PC for software
update downloads.
USB 2.0 (Device) Port
Located at the back of the machine. This port is used to connect to a local client
computer and is used as an input port for printing data.
100Base-TX/10Base-T Port
Located at the back of the machine. This port is used to connect to a network cable
when the optional printer kit is installed.
Office Finisher
Allows you to staple or sort copies automatically. The Office Finisher Tray can hold
1,000 sheets of 20 lb bond or 80 g/m
2
paper in Letter/A4 size or smaller.
Ethernet
USB2.0
Office Finisher
Tray
Office Finisher
(Optional)
Tandem Tray Module (Optional)
Tray 2
Tray 3

Xerox WorkCentre 7132 Specifications

General

Brand	Xerox
Model	WorkCentre 7132
Category	All in One Printer
Language	English