Power On/Off
Xerox WorkCentre 7132 System Administration Guide 17
Scan to FTP/SMB
Allows you to scan and store documents to specified destinations using the FTP or
SMB protocol. For more information, refer to Scan to FTP/SMB in the Scan/E-mail
chapter of the User Guide.
Scan to Mailbox
Enables the confidential mailbox or polling feature by storing the scanned documents
in private mailboxes. For more information, refer to Scan to Mailbox in the Scan/E-mail
chapter of the User Guide.
Check Mailbox
Allows you to confirm, print, or delete the documents in a mailbox. It also allows you to
change or release linkage with a job flow sheet and execute the linked job flow sheets.
For more information, refer to the Check Mailbox chapter of the User Guide.
Power On/Off
Powering On
Make sure that the machine is connected to a suitable power supply and that the power
plug is firmly connected to the electrical outlet.
The machine is ready to make copies a maximum of 42 seconds after powering on
(varies with machine configuration.) For more information, refer to Machine
Specifications in the Specifications chapter of the User Guide.
1. Press the power switch to the
<I> position.
NOTE: If the machine does not start
up, check that the RESET button on
the back of the machine is in the
reset position (depressed).
To Next Page
Loading...
Need help?
General
