EasyManuals Logo

Xerox WorkCentre 7132 System Administration Guide

Xerox WorkCentre 7132
184 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #63 background imageLoading...
Page #63 background image
Using CentreWare Internet Services to Configure Settings on the Machine
Xerox WorkCentre 7132 System Administration Guide 63
7. When the reboot message appears, select [Reboot Machine].
NOTE: For more information about the contents of items, refer to the CentreWare
Internet Services chapter of the User Guide.
SSDP
This page allows you to configure the SSDP settings for the following options.
NOTE: SSDP is available only after UPnP is enabled.
NOTE: Some settings on this page will only be available after you restart CentreWare
Internet Services, or after the machine is switched off and on.
1. At the CentreWare Internet Services home page for the machine, select the
[Properties] tab.
2. In the [Properties] frame, select the plus symbol [+] to the left of the [Protocol
Settings] folder.
3. Select [SSDP].
4. Set up the following option to be displayed in the frame.
Valid Advertising Period – Specify the time during which the advertising period
remains valid.
Maximum TTL – Specify the maximum TTL (time to live).
5. Select [Apply] to reflect the new setting.
6. Enter the user ID and password, then select [OK].
NOTE: The default user ID is "11111" and the default password is "x-admin".
7. When the reboot message appears, select [Reboot Machine].
NOTE: For more information about the contents of items, refer to the CentreWare
Internet Services chapter of the User Guide.
LDAP
This page allows you to configure the LDAP settings for the following options.
NOTE: Some settings on this page will only be available after you restart CentreWare
Internet Services, or after the machine is switched off and on.
1. At the CentreWare Internet Services home page for the machine, select the
[Properties] tab.
2. In the [Properties] frame, select the plus symbol [+] to the left of the [Protocol
Settings] folder.
3. Select [LDAP].

Table of Contents

Other manuals for Xerox WorkCentre 7132

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox WorkCentre 7132 and is the answer not in the manual?

Xerox WorkCentre 7132 Specifications

General IconGeneral
FunctionsPrint, Copy, Scan, Fax
Printing TechnologyLaser
Print Speed (Black)32 ppm
Print Resolution1200 x 1200 dpi
Max Resolution (BW)1200 x 1200 dpi
Duplex PrintingYes
Scan Resolution600 x 600 dpi
Copier Max Resolution600 x 600 dpi
ConnectivityEthernet, USB
Scanner TypeFlatbed
Fax Speed33.6 Kbps
USB ConnectivityUSB 2.0
Media SizeA4, Letter, Legal
Copy Speed (Black)32 ppm
DisplayColor Touch Screen
Network ConnectivityEthernet

Related product manuals