Xerox WorkCentre 7132 System Administration Guide

4 CentreWare Internet Services
56 Xerox WorkCentre 7132 System Administration Guide
• Generate Domain Search List Automatically – Allows you to enable to disable
the automatic setting to generate the domain search list.
• Domain Name 1 to 3 – Enter the domain name for domain name 1, domain
name 2 and domain name 3.
• Connection Time-Out – Allows you to specify the time-out period when
searching the domain.
• Dynamic DNS Update – Allows you to enable or disable the dynamic DNS
update.
WINS Server:
• Get WINS Server Address – Allows you to enable or disable the automatic
setting of the primary and secondary WINS server address via DHCP.
• Primary WINS Server Address – Enter the primary WINS address in the
xxx.xxx.xxx.xxx format.
• Secondary WINS Server Address – Enter the secondary (backup) WINS
address in the xxx.xxx.xxx.xxx format.
IP Address List: (Allows you to limit the IP addresses used for receiving print data
when TCP/IP is enabled.)
• IP Filter – Allows you to enable or disable IP filtering.
• No. – Displays the entry number of the IP address list from 1 to 10.
• Permitted IP Address – Enter the IP address for receiving print data when
TCP/IP is enabled.
• IP Mask – Enter an IP address mask for each IP address entered in Permitted
IP Address.
5. Select [Apply] to reflect the new setting.
6. Enter the user ID and password then select [OK].
NOTE: The default user ID is "11111" and the default password is "x-admin".
7. When the reboot message appears, select [Reboot Machine].
NOTE: For more information about the contents of items, refer to the CentreWare
Internet Services chapter of the User Guide.
LPD
This page allows you to configure the LPD settings for the following options.
NOTE: Some settings on this page will only be available after you restart CentreWare
Internet Services, or after the machine is switched off and on.
1. At the CentreWare Internet Services home page for the machine, select the
[Properties] tab.
2. In the [Properties] frame, select the plus symbol [+] to the left of the [Protocol
Settings] folder.
3. Select [LPD].

Xerox WorkCentre 7132 Specifications

General

Brand	Xerox
Model	WorkCentre 7132
Category	All in One Printer
Language	English