System Settings
Xerox WorkCentre 7132 System Administration Guide 33
Button names and icons used on the control panel may differ depending on the country
of purchase.
System Settings
This machine is pre-programmed with default settings which can be customized using
the System Settings. The System Settings can be accessed via the <Log In/Out>
button. The following set up categories are available.
• Common Settings
• Copy Mode Settings
• Network Settings
• Print Mode Settings
• Scan Mode Settings
• Fax Mode Settings
7 <Stop> Suspends or cancels a job depending on the job type. When
multiple jobs are being processed, all the jobs will be suspended
or cancelled. Selecting [Stop] on the [Job Status] screen stops
only the selected job.
8 <Start> Starts or resumes a job.
9 <Speed Dial> Enters speed dial codes.
10 <C> Deletes a numeric value or the last digit entered, and replaces the
current value with a default value. Also cancels suspended jobs.
11 <Dial Pause> Inserts a pause while dialing a fax number.
12 <*(asterisk)> Indicates the special character used in a fax number and
designates a group code. Also allows you to specify an F Code or
a password.
13
<All Se
rvices>
Display
s the [A
ll Servic
es] scre
en for se
lection
of all the
availabl
e
services on the machine.
14 <Features> Returns the display to the previous copy, fax, or scan feature
screen when the [Job Status] screen or [Machine Status] screen is
selected.
15 <Job Status> Displays the [Job Status] screen where you can check the
progress of a job, or display the log and detailed information of
completed jobs.
16 <Machine Status> Displays the [Machine Status] screen where you can check the
machine status, the billing meter, the status of the toner cartridge
or print various reports.
Button Function
To Next Page
Loading...
Need help?
General
