Xerox WorkCentre 7132 System Administration Guide

SMB
Xerox WorkCentre 7132 System Administration Guide 145
When printing fails
When the document cannot be deleted from the printer window
Other
Cause Confirmation Method Action
The machine is processing a
print request from another
client. (The receiving buffer is
set to non-spool mode).
Check that the machine has
a print job in progress. (This
indicates whether there are
files ready to print, and
displays any write error
dialogs.
After the machine has
processed the print request,
send a print job or change the
mode to the spool mode.
The number of sessions
exceeds the maximum.
Check that the machine is
processing simultaneous
requests (such as print
request or status inquiry
request) from multiple clients.
(This indicates remote clients
unable to use the machine,
and displays any write error
dialogs.
Wait for a while, send a print
request again.
Cause Confirmation Method Action
An attempt is made to delete
all documents displayed in
the printer window.
(Only the System
Administrator)
Check whether the attempt is
made to delete the print job
from the Printer menu in the
printer window.
Delete the print job from the
Document menu in the printer
window.
The document owner is
invalid.
Check whether the owner of
the selected document
matches the Windows log-in
name.
Use the owner name of the
document to log in to
Windows, then delete the
document.
Service Pack 4.0 or later is
not installed in the system.
(In Windows NT 4.0)
Check the Service Pack
version to be displayed when
you start Windows NT 4.0.
Install Service Pack 4.0 or
later.
Problem Action
Job history displays a
message that the document
name is undefined instead of
the correct job name.
Change the [Receiving Buffer - SMB Spool] setting from
[Memory] to [Hard Disk].

Xerox WorkCentre 7132 Specifications

General

Brand	Xerox
Model	WorkCentre 7132
Category	All in One Printer
Language	English