Xerox WorkCentre 7132 System Administration Guide

2 Product Overview
28 Xerox WorkCentre 7132 System Administration Guide
– Programming – Allows you to set emulation parameter item values. For a list of
parameters, refer to the User Guide.
– Store/Delete Programming – Allows you to store user-programmed emulation
mode parameters on the machine.
– Default Programming – Sets the default emulation mode settings when the
machine is turned on.
• PDF – Allows you to set parameter values and a password for PDF direct printing.
– Setup – Allows you to set emulation parameter item values for PDF direct
printing. For a list of PDF parameters, refer to the User Guide.
– Password – Allows you to enter a password to restrict access to PDF direct
printing.
Fax Receiving Mode
This feature allows you to set the fax reception mode: Manual Receive or Auto Receive.
1. Select [Fax Receiving Mode] on
the [Machine Status] screen.
2. Select the required option.
• Manual Receive – Starts receiving a fax or polling after you have answered the call
and confirmed it is a fax.
• Auto Receive – Receives a fax automatically.
Billing Meter/Print Report
This section describes the features that allow you to view the billing meter information,
and also specify the output sequence for various reports and lists.
1. Press the <Machine Status>
button on the control panel.
2. Select the [Billing Meter/Print
Report] tab.
3. Select the required option.
Billing Meter
This feature allows you to view the total number of prints made on the machine using
the [Current Meter Reading]. You can also view the serial number.
1. Select [Billing Meter] on the
[Billing Meter/Print Report]
screen.

Xerox WorkCentre 7132 Specifications

General

Brand	Xerox
Model	WorkCentre 7132
Category	All in One Printer
Language	English