Yamatake Corporation Operation Using SFC
ST3000 Smart Transmitter Series 900 Electronic Differential Pressure/Pressure Transmitter 6-51
6-8-2 :Release Constant Current Source Mode
How to release the constant current source mode:
Step Description SFC screen
1
Press the key.
Displays the current output.
2
Press the key.
Releases the constant current source
mode.
Check that the # mark disappears.
Remarks
Release the constant current source mode
using this procedure. It is automatically
released when no SFC is operated for
more than 10 minutes.
OUT-
J
PUT
INPUT
OUTPUT FIT-1234
WORKING...
OUTPUT FIT-1234
50.00 % #
CLR
( No )
OUTPUT FIT-1234
WORKING...
OUTPUT FIT-1234
READY...