Yamatake STD910 User Manual

Yamatake Corporation Operation of the Transmitter
ST3000 Smart Transmitter Series 900 Electronic Differential Pressure/Pressure Transmitter 5-3
5-2-2 :Setting Tag No.
Procedure
Start communications with the transmitter. Use this procedure, to set a tag No.:
The tag No. is displayed on the name plate of this transmitter.
The procedure for setting FIT-1234 for the tag No. is included, below.
Correct an input
Correct keying errors, using this procedure:
Press the key to release alphabet mode. Press the key to shift the cursor
back by one column and press the key again. Input correct character.
Correct keying errors using this procedure:
Press the key to shift the cursor back by one column. Input a correct number.
Step Description SFC screen
1
Press the , , , and
keys in that order
2
Press the and keys in
that order.
3
Press the , , , and
keys in that order.
4
Press the key.
Tag No. FIT-1234 is set.
ALPHA
URV
F
100%
MENU
I
ITEM
DE CONF.
T
6
DSTJ TAG NO.
LIN DP FIT-
ALPHA
TIME
DSTJ TAG NO.
LIN DP FIT-
V
1
W
2
X
3
SW VER
R
4
DSTJ TAG NO.
LIN DP FIT-1234
ENTER
( Yes )
NON-VOL
DSTJ TAG NO.
WORKING...
DSTJ TAG NO.
LIN DP FIT-1234
ALPHA
Q
ADE
ALPHA
Q
ADE

Yamatake STD910 Specifications

General

Brand	Yamatake
Model	STD910
Category	Transmitter
Language	English