YASKAWA DX200 - Page 968

Alarm List Alarm Number (4000 to 4999)
Alarm List-747
other If the alarm occurs again, save the CMOS.BIN in maintenance mode,
and then contact your Yaskawa representative about occurrence
status (operating procedure).
32771 The value for the unsigned 1-
byte data type variable
exceeded the maximum
value.
Setting error (1)Check the following settings.
∙ Check the settings for variable, and then correct the job to fall within
the input range of the tag.
other If the alarm occurs again, save the CMOS.BIN in maintenance mode,
and then contact your Yaskawa representative about occurrence
status (operating procedure).
32772 The value for the signed 2-
byte data type variable
exceeded the maximum
value.
Setting error (1)Check the following settings.
∙ Check the settings for variable, and then correct the job to fall within
the input range of the tag.
other If the alarm occurs again, save the CMOS.BIN in maintenance mode,
and then contact your Yaskawa representative about occurrence
status (operating procedure).
32773 The value for the unsigned 2-
byte data type variable
exceeded the maximum
value.
Setting error (1)Check the following settings.
∙ Check the settings for variable, and then correct the job to fall within
the input range of the tag.
other If the alarm occurs again, save the CMOS.BIN in maintenance mode,
and then contact your Yaskawa representative about occurrence
status (operating procedure).
32774 The value for the signed 4-
byte data type variable
exceeded the maximum
value.
Setting error (1)Check the following settings.
∙ Check the settings for variable, and then correct the job to fall within
the input range of the tag.
other If the alarm occurs again, save the CMOS.BIN in maintenance mode,
and then contact your Yaskawa representative about occurrence
status (operating procedure).
Alarm
Number
Alarm Name
Sub
Code
Meaning Cause Remedy