YASKAWA JUSP-MD D01A Series - Page 349

10 Appendix
10.2.2 Parameters
10-30
Pn512
2 Output Signal Inverse Setting 0000 to 0111 − 0000 After restart Setup 3.4.2
Pn513 2 Reserved (Do not change.) – – 0000 – – –
(cont’d)
Parameter
No.
Size Name
Setting
Range
Units
Factory
Setting
When Enabled
Classifi-
cation
Reference
Section
Output Signal Inversion for CN1-25 or -26 Terminal
0 Does not inverse outputs.
1 Inverses outputs.
Output Signal Inversion for CN1-27 or -28 Terminal
0 Does not inverse outputs.
1 Inverses outputs.
Output Signal Inversion for CN1-29 or -30 Terminal
0 Does not inverse outputs.
1 Inverses outputs.
Reserved (Do not change.)
4th 3rd 2nd 1st
digit digit digit digit
n.
