5.2 Tuning-less Function
5-13
Load Level
a) Using the utility function
To change the setting, refer to 5.2.2 Tuning-less Levels Setting (Fn200) Procedure.
b) Using the parameter
Digital Operator Display Meaning
Mode 0 Load level: Low
Mode 1 [Factory setting] Load level: Medium
Mode 2 Load level: High
Parameter Meaning When Enabled Classification
Pn170
n.0 Load level: Low (Mode 0)
Immediately Setup
n.1
[Factory setting]
Load level: Medium (Mode 1)
n.2 Load level: High (Mode 2)
To Next Page
Loading...
Need help?
General
