Yealink SIP-T46G Administrator's Guide

Administrator’s Guide for SIP-T46G IP Phone
222
2. In the Export or Import Configuration block, click Export to open the file download
window, and then save the file to your local system.
This section describes solutions to some common scenarios that may occur while using
the IP phone. If you encounter a scenario which is not listed in this section, contact your
Yealink reseller for further support.
Do one of the following:
 Check that the power LED is on to ensure the IP phone is powered on.
 Ensure the IP phone is properly plugged into a functional AC outlet.
 Ensure that the IP phone isn’t plugged into a plug controlled by a switch that is off.
 If the IP phone is plugged into a power strip, try plugging it directly into a wall
outlet instead.
 If your phone is powered from PoE, ensure you use a PoE compliant switch or hub.
Do one of the following:
 Ensure that the Ethernet cable is plugged into the Internet port on the IP phone and
the Ethernet cable is not loose.
 Ensure the Ethernet cable is not damaged.
 Ensure the IP address and other network parameters are set correctly.

Yealink SIP-T46G Specifications

General

Backlight	Yes
Power requirements	100-240V, DC 5V
Touchscreen	-
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
Voice codecs	G.711, G.722, G.723, G.726, G.729A, G.729B
Bluetooth	No
RJ-9 ports quantity	2
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	185 mm
Width	244 mm
Height	213 mm