Yealink VC880 - System Accessories; Expansion Microphones and Soundbar Usage

| Accessories with Your System | 100
Deleting the Stored Preset by Remote control
Procedure
1.
Do one of the following on your remote control when your system is idle:
• For VC880/VC800/VC500/PVT980/PVT950, navigate to More > Preset Location.
•
If you are using remote control, select the local video image and press OK key, and then press .
2.
Select Delete.
3.
Select the desired preset.
4.
Select Confirm Delete.
The stored preset is deleted.
Clearing up the Stored Preset
•
Clearing up the Stored Preset by Remote Control
Clearing up the Stored Preset by Remote Control
Procedure
1.
Do one of the following on your remote control when your system is idle:
•
Select the local video image and press OK key, and then press .
• For VC880/VC800/VC500/PVT980/PVT950, navigate to More > Preset Location.
2.
Select Clear and then press OK key.
3.
Select OK, and then press OK key.
Accessories with Your System
•
Using CPE90 Wired Expansion Microphones
•
Using the Soundbar
•
Using the CPW90-BT Bluetooth Wireless Microphones with VCS
•
Using the CPN10 PSTN Box
•
Using the VCC22 Video Conferencing Cameras
Using CPE90 Wired Expansion Microphones
This section introduces how to use CPE90 Wired Expansion Microphones.
•
Placing CPE90 Wired Expansion Microphones