| Using WPP20 Wireless Presentation Pod | 78
Receiving Shared Whiteboard or Content
WPP20 can receive whiteboard or content shared by the VCS codec or other devices. If the administrator needs to
confirm the authentication before setting the WPP20 to obtain the collaboration data, click the Sharing area to receive
the sharing on the Yealink Wireless Presentation Pod software. Enter the four-digit authentication code in the security
check box. The authentication code is displayed in the upper right corner of the display device connected to the VCS
codec.
You can use the WPP20 annotation tool or the whiteboard annotation tool to take notes.
Related information
Introduction of WPP20 Note Toolbar
Introduction of the WPP20 Whiteboard Note Toolbar
To Next Page
Loading...
